REZINA.UZ
ELASTIK FORM LLC
From idea to finished part.
HomeCatalogProductionOrderContactsBlog
Rubber Grades
from 20 kgFrom 48 hoursDelivery to Fergana in 1-2 daysQuality guarantee

Rubber Grades in Fergana — Urgent production from 48 hours

Material engineering for rubber grades in Fergana: medium, temperature and pressure analysis → optimal grade from NBR / HNBR — oil and fuel resistant, EPDM — steam, water, weather, UV, Viton / FKM — chemicals, acids, high temp. Delivery to Fergana in 1-2 days. Fergana region production facilities. Fergana is strong in petrochemicals and chemicals — for Rubber Grades we match rubber grades to actual operating conditions at regional sites.

Write on Telegram+998 90 944 99 40
Materials
NBR / HNBR — oil and fuel resistantEPDM — steam, water, weather, UVViton / FKM — chemicals, acids, high tempSilicone VMQ / FVMQ — food, heat resistantCR (neoprene) — oil, fuel, ozonePTFE — extreme chemical resistance
Applications
  • Gasket and sealing material
  • Equipment vibration isolation
  • Vessel and tray lining
  • Leak and chemical protection
  • Food and pharmaceutical lines
Advantages
  • ✓Grade selection for oil, acid, steam or food media
  • ✓1000×1000 mm sheets and rolls, cut to drawing
  • ✓Shore A hardness 30–90
  • ✓Food and medical grade certificates available
  • ✓Import grade and compound substitution

Fergana petrochemicals and Fergana-Azot need Viton, FKM and PTFE for acids, alkalis and ammonia. NBR for petroleum. Grade selected by media protocol.

Fergana region is Uzbekistan's chemical industry center. The Fergana refinery and Fergana-Azot have strict requirements for seal chemical resistance. We select materials (Viton, FKM, PTFE) for aggressive media at temperatures up to +250°C, ensuring long part service life.

Delivery & production

Fergana · Delivery to Fergana in 1-2 days

Production in Tashkent. Delivery to Fergana in 1-2 days. Shipped by transport company, packaging included.

Made at our own plant in Tashkent. Packaging and batch documents included.

Material selection by conditions

Short guide — full table on the product page

MediumTemperaturePressureMaterial
Oil, diesel, fuels−30…+120 °Cno pressure / gasketNBR, HNBR
Steam, hot water, weather−40…+150 °Cup to 16 barEPDM
Acids, alkalis, solventsup to +200 °Cup to 40 barViton / FKM

Full material selection table →

FAQ

Delivery, materials and lead times for your order

Pick a topic or open any question

We manufacture in Tashkent and ship to Fergana by transport company. Delivery to Fergana in 1-2 days. Double packaging and cargo tracking.

Depends on medium (oil, water, steam, chemicals), temperature and pressure. Send drawing or sample via Telegram — our engineer will select NBR, EPDM, Viton, silicone or polyurethane for your site in Fergana. Short guide table below; full grades on the product page.

From 100 pcs (or one batch for custom shapes). Lead time from 48 hours after drawing and material approval. For urgent orders to Fergana, ask when ordering — we often accelerate using existing molds.

Yes. Send drawing, photos or the worn part via Telegram @Uzne0 — we quote lead time, material and price. For plants in Fergana, photos with a scale and operating medium description are usually enough.

If the part does not match the approved drawing in dimensions and material, we rework at our cost. Before a production run we agree tolerances and inspection method.

Manufacturing and warehouse are in Tashkent. Delivery to Fergana in 1-2 days. After production we hand over to a carrier or arrange courier delivery.

HomeCatalog
BlogOrderContacts