REZINA.UZ
ELASTIK FORM LLC
From idea to finished part.
HomeCatalogProductionOrderContactsBlog
Rubber Cords
from 100 mFrom 48 hoursDelivery to Karshi in 1-2 daysQuality guarantee

Rubber Cords in Karshi — Production & Delivery

Manufacturing rubber cords for Karshi — from single samples to serial batches. We use NBR, EPDM, Silicone, selecting the grade for your operating conditions. Delivery to Karshi in 1-2 days. Karshi is strong in oil & gas and energy — for Rubber Cords we match rubber grades to actual operating conditions at regional sites.

Write on WhatsApp+998 90 944 99 40
Materials
NBR (oil-resistant)EPDM (heat-resistant)Silicone (food-grade)Natural rubberPolyurethane
Applications
  • Joint and groove sealing
  • Vibration isolation
  • Damping in mechanisms
  • Hatch and door sealing
  • Gasket material
Advantages
  • ✓Diameter from 2 to 50 mm
  • ✓Continuous extrusion
  • ✓Shore A hardness selection
  • ✓Round, square, U-shaped profiles
  • ✓Supply by meter and coil

Mubarek and Shurtan facility pipeline cladding and process hatches sealed with Viton and NBR cords 6–25 mm diameter, resistant to gas media under high pressure.

Kashkadarya is Uzbekistan's oil & gas capital. Mubarek GPC and Shurtan gas-chemical complex operate equipment at pressures up to 200 atm and temperatures up to +200°C. Seals, cuffs and gaskets wear faster here — we select FKM and PTFE grades with extended service life for these conditions.

Delivery & production

Karshi · Delivery to Karshi in 1-2 days

Manufactured in Tashkent. Delivery to Karshi in 1-2 days. Packed in corrugated cardboard and stretch film.

Made at our own plant in Tashkent. Packaging and batch documents included.

Material selection by conditions

Short guide — full table on the product page

MediumTemperaturePressureMaterial
Static sealing−30…+100 °Cup to 5 barNBR, EPDM
Food lines−40…+180 °Cup to 3 barSilicone
Chemical resistanceup to +150 °Cup to 10 barViton, FKM

Full material selection table →

FAQ

Delivery, materials and lead times for your order

Pick a topic or open any question

We manufacture in Tashkent and ship to Karshi by transport company. Delivery to Karshi in 1-2 days. Double packaging and cargo tracking.

Depends on medium (oil, water, steam, chemicals), temperature and pressure. Send drawing or sample via WhatsApp — our engineer will select NBR, EPDM, Viton, silicone or polyurethane for your site in Karshi. Short guide table below; full grades on the product page.

From 100 pcs (or one batch for custom shapes). Lead time from 48 hours after drawing and material approval. For urgent orders to Karshi, ask when ordering — we often accelerate using existing molds.

Yes. Send drawing, photos or the worn part via WhatsApp — we quote lead time, material and price. For plants in Karshi, photos with a scale and operating medium description are usually enough.

If the part does not match the approved drawing in dimensions and material, we rework at our cost. Before a production run we agree tolerances and inspection method.

Manufacturing and warehouse are in Tashkent. Delivery to Karshi in 1-2 days. After production we hand over to a carrier or arrange courier delivery.

HomeCatalog
BlogOrderContacts