REZINA.UZ
ELASTIK FORM LLC
From idea to finished part.
HomeCatalogProductionOrderContactsBlog
Rubber Cords
from 100 mFrom 48 hoursDelivery to Mirzo-Ulugbek in 1 dayQuality guarantee

Rubber Cords factory for Mirzo-Ulugbek District

Urgent rubber cords to Mirzo-Ulugbek District: from 48 hours, Tashkent factory. NBR, EPDM, Silicone. Delivery to Mirzo-Ulugbek in 1 day. For machine-building factories and chemical plants. Mirzo-Ulugbek District is active in machine-building and chemicals; for Rubber Cords we match materials to Mirzo-Ulugbek machine-building and chemical plants operating conditions.

Write on Telegram+998 90 944 99 40
Materials
NBR (oil-resistant)EPDM (heat-resistant)Silicone (food-grade)Natural rubberPolyurethane
Applications
  • Joint and groove sealing
  • Vibration isolation
  • Damping in mechanisms
  • Hatch and door sealing
  • Gasket material
Advantages
  • ✓Diameter from 2 to 50 mm
  • ✓Continuous extrusion
  • ✓Shore A hardness selection
  • ✓Round, square, U-shaped profiles
  • ✓Supply by meter and coil

Mirzo-Ulugbek plant production shops and reactor zones use Viton and NBR cords. Chemical autoclaves — FKM cords 8–30 mm diameter.

Mirzo-Ulugbek District has historically specialized in machine-building and chemical industry. Major district factories regularly order sealing rings for reactors, hydraulic cylinder cuffs and chemical-resistant Viton and PTFE gaskets. We know the technical requirements of district industrial enterprises and select materials considering the working medium.

Delivery & production

Mirzo-Ulugbek District · Delivery to Mirzo-Ulugbek in 1 day

Made in Tashkent, delivery across Mirzo-Ulugbek District in 1 day. Corrugated cardboard and stretch wrap.

Made at our own plant in Tashkent. Packaging and batch documents included.

Material selection by conditions

Short guide — full table on the product page

MediumTemperaturePressureMaterial
Static sealing−30…+100 °Cup to 5 barNBR, EPDM
Food lines−40…+180 °Cup to 3 barSilicone
Chemical resistanceup to +150 °Cup to 10 barViton, FKM

Full material selection table →

FAQ

Delivery, materials and lead times for your order

Pick a topic or open any question

Our factory is in Tashkent — we deliver to Mirzo-Ulugbek District same day or next morning by courier or carrier. Delivery to Mirzo-Ulugbek in 1 day. Packaging and documents for every batch.

Depends on medium (oil, water, steam, chemicals), temperature and pressure. Send drawing or sample via Telegram — our engineer will select NBR, EPDM, Viton, silicone or polyurethane for your site in Mirzo-Ulugbek District. Short guide table below; full grades on the product page.

From 100 pcs (or one batch for custom shapes). Lead time from 48 hours after drawing and material approval. For urgent orders to Mirzo-Ulugbek District, ask when ordering — we often accelerate using existing molds.

Yes. Send drawing, photos or the worn part via Telegram @Uzne0 — we quote lead time, material and price. For plants in Mirzo-Ulugbek District, photos with a scale and operating medium description are usually enough.

If the part does not match the approved drawing in dimensions and material, we rework at our cost. Before a production run we agree tolerances and inspection method.

Manufacturing and warehouse are in Tashkent. Delivery to Mirzo-Ulugbek in 1 day. After production we hand over to a carrier or arrange courier delivery.

HomeCatalog
BlogOrderContacts