EPDM is recommended for water, steam and a weak alkali. FKM or PTFE for acid and hydrocarbons; the composition is better stated in the order. Made in Tashkent. Delivery to Fergana in 1-2 days.
EPDM — primary material for drinking waterNBR — for industrial water supplySilicone — for hot water supplyPTFE — for aggressive wastewaterNBR — for oil in the pump assembly
Products for industry
Gate valve and butterfly valve seals
Pipeline flange gaskets
Gate-valve rings
Sewer and water pipe cuffs
Pump station seals
Flange seals
Advantages
✓Safe materials for drinking water
✓Chlorine and chemical resistant
✓Seal service life from 10 years
✓Replacement of AVK, Hawle seals
✓Working with water utilities and treatment plants
TashkentPlant
yesDrawing or sample
3–5 daysLead time
Delivery to Fergana in 1-2 daysDispatch
What we make
Pump cuffs and shaft seals
Gate and valve rings
Flange gaskets
Diaphragms and flat blanks
Material recommendation
EPDM — water, weak solutions, outdoors
NBR — bearing oil and hydraulic drive. For water — EPDM
Polyurethane — if the water carries sand and the lip wears
What to include in a request
A drawing, dimensioned sketch or worn sample of the part.
The working medium, temperature, pressure and duty cycle.
Seat dimensions if the seal works in a groove, on a shaft or rod.
Quantity and the date the batch is required.
Selection and limits
The grade follows medium, temperature and load; colour or a name on old rubber does not prove its compound.
Dimensions and tolerances are agreed before launch; worn samples are checked against the seat as well.
Rubber bladders, pneumatic chambers, bladder compensators and large molded parts are not manufactured.